Alternating Headlight Flashers:
For use with halogen and incandescent light heads.
90 FPM per side. Custom flash rates available.
Override feature works with the vehicle's high/low beam switch to prevent high beams from flashing.
Model 03.W125 is compatible with some daytime running lights (DRL) and requires a separate power switch.
Model 03.W126 has an additional low-current control wire which permits operation from an existing low-current switch.
100% solid-state.
Waterproof.
Made in the U.S.A.
Dual Speed
Choose 80 or 220 FPM per side during installation.
100% solid-state.
Night-time Cut Off deactivates the flasher when low beam lights are on.
Horn Feature allows high beam headlights to flash when horn is tapped and all lights are off.
High Beam Override works with the vehicle's high/low beam switch to prevent high beams from flashing.
Custom flash rates available.
Waterproof.
Made in the U.S.A
Alternating Grille/Deck Light Flasher
For use with halogen and incandescent light heads.
Wire directly to grille lights or deck lights.
90 FPM per side. Custom flash rates available.
100% solid-state.
Waterproof.
Made in the U.S.A
Bi-Directional
Bi-directional headlight flasher for positive- or ground-switched vehicles.
Choose one of four flash patterns when installing: Random, 90 FPM Alternating, 90 FPM Simultaneous, or Double Alternating-Simultaneous.
LEDs indicate flash pattern.
High Beam Override works with the vehicle's high/low beam switch to prevent high beams from flashing.
Optional nighttime cut-off.
Black ABS plastic housing.
Waterproof.
Made in the U.S.A
Sequential
Controls up to eight light heads.
Not for use with headlights.
Three sequential modes: left to right, right to left and center out.
100% solid-state.
Waterproof.
Made in the U.S.A.
Random
For use with halogen and incandescent light heads.
Six random flash patterns including alternating quad flash, alternating double flash, quad simultaneous flash, wig wag - 90 FPM, wig wag - 120 FPM, and simultaneous - 90 FPM.
Override feature works with the vehicle's high/low beam switch to prevent high beams from flashing.
Model 03.W3125 is compatible with some daytime running lights (DRL) and requires a separate power switch.
Model 03.W3126 has an additional low-current control wire which permits operation from an existing low-current switch.
100% solid-state.
Waterproof.
Made in the U.S.A