Providing Protection To Those Who Protect Us - Since 1950

TechTrade Pro-Tech 8 Titan Short Cuff (TT-PT8TNSC) - $85.00

Pro-Tech 8 Titan

The rugged Pro-Tech 8 Titan glove can satisfy any firefighter��s craving for dexterity, flexibility, grip, comfort and fit. Whether on a truck or an engine, Pro-Tech 8 Titan will efficiently handle every fire ground task you are faced with as well as basic motor vehicle extrication.

The varied multi-layer design, using durable knitted high performance fibers, allows incredibly fast, soft and comfortable break in with thermal protection that actually increases after washing. The gloves will remain soft and flexible after use. The inner liner is 100% knitted Nomex� and the Titan is also fully lined with 100% Kevlar, which provides much greater cut resistance than leather alone.

Pro-Tech 8 Titan's unique multi-layer knuckle guard system reinforces protection in an area that is the most vulnerable to radiant heat burns. (see knuckle guard photo below)

The Pro-Tech 8 Titan Structural Firefighting Glove is independently certified as compliant to the NFPA 1971 Standard �� 2013 Edition �� on Protective Ensemble for Structural Firefighting; certifying agent Safety Equipment Institute, Virginia

Materials & Layering:
The palm side outermost layer is water repellent suede goat skin tanned and designed to resist cracking, peeling, and stiffening while also providing a sure grip when wet.
The ring and middle finger sections are cut and sewn independently for enhanced dexterity.
Palm side underneath suede is a full layer, fingertip to cuff edge, of blended Kevlar�/Nomex� plus two partial layers of 100% Nomex� that run from mid-palm to the cuff edge.
The inner liner on the palm side is another full layer of 100% Nomex�.
The back side of the outer layer is water repellent suede goat skin leather, which covers the fingertip area, a 1" wide welt along the finger crotch and the knuckle guard to the cuff edge.
Under the leather portions on the glove back side is a fingertip to cuff-edge full layer of 100% Kevlar� and another full layer of 100% Nomex�.
The inner liner on the back side is another full layer of 100% Nomex�.
The knuckle guard portion has an outer layer of 100% Kevlar�, one layer of 100% Nomex� and two layers of silicon carbide both fused to 100% Kevlar�, another layer of 100% Kevlar� and another layer of 100% Nomex�.
The finger side walls are comprised of an outer layer Kevlar�/Nomex�, and two underneath layers of 100% Nomex�.
The glove inner layers are fully lined with a double layer of highly breathable polyurethane, completely sealed in the finger and sidewall area to prevent blood borne pathogen and liquid penetration.
The cuff area construction is supported by separate inner and outer layers of leather welting to prevent moisture wicking and to enhance support and durability.
100% Kevlar� high burst thread is used throughout and the cuff edge piping is 100% Kevlar�.
Size: